Resources
Do you know what RAID stands for? It's an acronym for Redundant Array of Inexpensive Disks. RAID is supposed to be the breakthrough technology to reliable data storage management by arranging disks into redundancy arrays, which purpose is to protect data loss.
More details on RAID and how it works can be found at Wikipedia.
RAID Failure - Although a RAID system is supposedly reliable data storage setup, RAID failure can still occur and to many, it is unavoidable.
More information on Raid failure here: Raid Failure.
More details on RAID and how it works can be found at Wikipedia.
RAID Failure - Although a RAID system is supposedly reliable data storage setup, RAID failure can still occur and to many, it is unavoidable.
More information on Raid failure here: Raid Failure.
| Product Highlights |
 | Promise Technology FASTTRAK TX2300 2-Port SATA RAID PCI Adapter 2 Serial ATA 3Gb/s Ports for support of up to 2 drives, Native Command Queuing (NCQ), SATA Tagged Command Queuing (TCQ), Large LBA support for drives above 137GB, Combine with the SuperSwap 1100 for an advanced internal storage system. |
 | Addonics ADST114 4-Port 66Mhz SATA RAID Controller Card The Addonics SATA 4-Port RAID controller makes adding RAID storage to any computers easy and affordable. Together with the Addonics optional Disk Array system, high performance and reliable data storage system can be added to any computer at less than half of the cost of traditional SCSI or IDE solution. |
 | Data Robotics DR04DD10 Drobo 4-Bays USB 2.0 and FireWire 800 Fully Automated SATA Robotic Storage Array The safe, expandable Drobo storage solution protects your data against a hard drive crash, yet can expand dynamically at any time in just seconds. With nothing to configure or manage, Drobo is now the ideal solution for primary storage as well as backup. |
| More on Raid Recovery |
Choosing A RAID Recovery Service for Your RAID System
A RAID recovery service should be chosen based on your particular circumstances and needs. If you do not know what the problem is you should never attempt to recover the information yourself. When it comes to computers, things happen - and always at the most inopportune times.
What Causes RAID Failure and How to Recover From It
Information that has been lost on one or more discs is no doubt information that is important to you on either a personal or business level or sometimes both. Lost information can be recovered from a RAID failure and many times it is possible regardless of the reason for the failure.
Read This Before Attempting to Recover Your RAID 0 Data
Most RAID recovery systems use an algorithm where an exhaustive scan of the drive is performed to locate lost volumes. It recovers data from corrupted RAID configuration, failed/ bad Controller card, damaged/ deleted/ corrupted volumes even from initialized disks. In the case of RAID 0, the information is not repeated on another disc so it is vital to be able to recover all of the information that was lost.
RAID recovery for Linux Systems
As most people realize, dealing with Linux issues is not the same as dealing with Windows or other systems. The same is true when you encounter RAID issues and need to use Raid recovery for your Linux.
Recover Data From A Broken RAID Level 5 or 0 Array With RAID Reconstructor
Runtime's RAID Reconstructor will help you to recover data from a broken RAID Level 5 Array consisting of 3 to 14 drives, RAID Level 0 Array (Striping) consisting of 2 drives.
